護坡模具是矩形,六角形，設計有底部,把模具放上震動的平臺,再放入提前攪拌好的混凝土,經過1分鐘震動,促使混凝土中氣泡散發出,然后將裝入混凝土的護坡模具放于陰涼處,等待水泥凝固后拆模具就完成了整個生產工藝。
The curb stone mold is rectangular and designed with a bottom. Put the mold on the vibrating platform, and then put the concrete mixed in advance. After 1 minute of vibration, the bubbles in the concrete will be scattered. Then put the curb stone mold loaded into the concrete in a cool place, wait for the cement to set, and then remove the mold to complete the whole production process.

隨著我們對護坡模具的質量和數量的要求都越來越高,所以我們需要對這種模具的各個方面進行不斷地改善和發展,因為這種模具的生產過程是比較復雜的,總是容易出現失誤,所以總會造成材料的浪費,所以我們應該簡化模具的制作過程。

As we have higher and higher requirements for the quality and quantity of curb stone molds, we need to continuously improve and develop all aspects of this kind of molds. Because the production process of this kind of molds is relatively complex and prone to mistakes, it will always cause a waste of materials, so we should simplify the manufacturing process of molds.

還有就是這種模具使用周期是比較長的,我們每次使用完這種模具之后,需要經過大概一兩天的時間才能進行下一次的使用,這樣對模具的生產效率的影響是非常大的。

In addition, the service cycle of this kind of mold is relatively long. Every time we use this kind of mold, it takes about one or two days to use it again, which has a great impact on the production efficiency of the mold.

還有就是我們應該延長這種模具的使用時間,這樣就會減少了對模具的更換,也就相應的節省了資源,是比較符合節能環保的理念的。

In addition, we should extend the service time of this kind of mold, which will reduce the replacement of the mold and save resources accordingly, which is more in line with the concept of energy conservation and environmental protection.